mikejenkins

Fellas,

I thought that I might have hooked up the solenoid incorrectly...

First I had the solenoid plugged into the harness without the white mark while the white marked harness remained plugged in normally.... this yielded 3 to 4 pounds of boost

then I plugged the solenoid into the harness with white mark and replugged the unmarked harness as it was stock... this yielded 3 to 4 pounds of boost

then I unplugged the unmarked harness altogether while the solenoid remained plugged into the white marked harness... this yielded 3 to 4 pounds of boost

then I plugged the solenoid into the unmarked harness and left the white marked harness unplugged... this yielded 3 to 4 pounds of boost.

Obviously, the boost isn't being affected at all... any thoughts?

So now I'm thinking that perhaps I rigged the hoses to the solenoid incorrectly... or maybe the POWER FC is bad.

WTF, Some one please help!!!
Thanks.
Mike

BTW, If anyone has English directions specifically for the POWER FC BOOST CONTROL KIT I'd appreciate them. Thanks again.