3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

oil pressure light or oil level light?

Thread Tools
 
Search this Thread
 
Old 03-21-04, 03:34 PM
  #1  
The bomb is in the toy!1!

Thread Starter
iTrader: (4)
 
cloud9's Avatar
 
Join Date: Oct 2003
Location: Dallas Tx.
Posts: 2,176
Received 263 Likes on 154 Posts
oil pressure light or oil level light?

The light on my stock oil pressure sensor gauge was coming on and off the other day, it would stay on for about 4 seconds and then turn back of and only when I would be cruising at like 2.3K at a constand speed in like 4th gear (happened in third gear too) But it never happened when pushing the car at all just while cruising at a constant speed. It didn't make any sense to me because I KNEW that my oil level was full (I also checked my oil level later when I got home and it was full) and the oil pressure gauge wasn't too low of too high when driving (or ever for that matter). When I searched about this I THINK what is correct is that the light is just for oil level. Is that correct? Either way could the sensor just be going bad I have heard that they crap out all the time but I am still concerned, any advice on what to check or anything would be appreciated, thanks.
Old 03-21-04, 03:37 PM
  #2  
Full Member

 
DjRannyKan's Avatar
 
Join Date: Jun 2003
Location: Cuyahoga Falls Oh
Posts: 238
Likes: 0
Received 0 Likes on 0 Posts
check the wires and connections.
Old 03-21-04, 04:51 PM
  #3  
The bomb is in the toy!1!

Thread Starter
iTrader: (4)
 
cloud9's Avatar
 
Join Date: Oct 2003
Location: Dallas Tx.
Posts: 2,176
Received 263 Likes on 154 Posts
well am I over looking something, like is there something that could be wrong with the car I am not seeing, or does this sound like it's just the gauge messing up, I do know that I am not low on oil but if the gauge is messing up then I supose I could have a higher/lower oil pressure than it is actually showing, could that be why the light is coming on? But I was under the impression that the light only comes on if you are low on oil??
Old 03-21-04, 07:22 PM
  #4  
Rotary Freak

 
duboisr's Avatar
 
Join Date: Jan 2002
Location: Nashville Tn
Posts: 2,171
Likes: 0
Received 1 Like on 1 Post
It is for oil level , take the sender out ( three 10mm bolts ) and clean it . See if the float moves freely on the two pins and the contacts are clean . Put it back with a good O- ring so it will not leak . Also check the wire connection joints .
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
andyvideopro
General Rotary Tech Support
3
08-20-15 10:55 AM



Quick Reply: oil pressure light or oil level light?



All times are GMT -5. The time now is 06:52 AM.