need some help once again...
#1
Full Member
Thread Starter
iTrader: (1)
Join Date: Sep 2006
Location: bristol, tennessee
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
need some help once again...
ok just replaced the turbos about week back new gaskets the works. sealed it all up and ran good except for only 5 or 6lbs boost on secondary. then an exhaust leak started and has got worse within a couple days. i cant figure out how to fix it i have tighten everything down. checked and rechecked to make sure i didnt mess up the gaskets. but its crazy loud i need it fixed just dont know what to do...
#3
Moderator
iTrader: (7)
Intake couplers. Remove every coupler or elbow between the turbos and throttle elbow, take it OFF THE CAR, and turn it inside out. If it's chewed down to the polyester fabric reinforcement it's probably leaking.
Also, tighter with the hose clamps can be damaging to the couplers too.
Dave
Also, tighter with the hose clamps can be damaging to the couplers too.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
blkops
3rd Generation Specific (1993-2002)
7
08-12-15 01:30 PM
Dannis
3rd Generation Specific (1993-2002)
8
04-26-03 12:55 AM
az_lynx
3rd Generation Specific (1993-2002)
7
03-31-02 08:40 PM