I was just trying to find out if there is anyone who knows how much boost my stalk twins can handle on my 1993 rx7. I have not upgraded the fuel set up yet so i also need to know how much i can run without my fuel cutting out.

I was wondering this because i am thinking of getting the APEXi AVC R boost controle. I need to cut some of my turbo lag out in 2-5 gear. But it would also be nice to boost up a little bit.

 

10psi

STOCK.

 

no i need to know how much i can boost up from stalk, without my fuel cutting out.

 

The word you are looking for is STOCK.

10psi


use the search button. this thread will be closed in no time.

 

ok dip. i dont want the 'stock' boost level. the turbos can take more than 10psi. the APEXi AVC R boost control can let me boost up and and change the boost level for every 500rpms. So how much can i push on the twins and how much will my fuel alow me to push.

 

http://www.scuderiaciriani.com/rx7/fuel_cut_info.html

 

Buddy, this is your second ******* post on this in a day!! And not to mention, you're still say STALK instead of STOCK!!

https://www.rx7club.com/showthread.p...hreadid=289596

THEY ARE STOCK TURBO's.....NOT STALK!!! COMPRENDE???

 

Man, if you think the stock twins have turbo lag.........Then you better never go single.

 

LOL.. 14psi is pretty much maxing out the "stalk" turbos..

 

If you are still using the stock engine computer, 10 psi IS the highest boost level you should run. Next time, try listening to people who know more than you do.

 

no, he has the stalk engine computer

 

Good point.. never go over stock unless you have an ECU...

 

I hear that is a very rare ECU thats good for 10psi max.

 

You guys never herd of the STALK PMS??

Just remove the vacuum hose running to your wastegate. You will have all the boost you need.