manual steering conversion
#1
Full Member
Thread Starter
Join Date: May 2004
Location: MN
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
manual steering conversion
Guys,
I remember reading a thread a while back about changing the steering rack from the stock P/S to a 2nd gen manual rack. I've searched more than a few times but can't seem to remember the thread.
I need to know if I have to buy new balljoints, or if I can use the current balljoints off my stock rack.
Thanks
I remember reading a thread a while back about changing the steering rack from the stock P/S to a 2nd gen manual rack. I've searched more than a few times but can't seem to remember the thread.
I need to know if I have to buy new balljoints, or if I can use the current balljoints off my stock rack.
Thanks
#2
Keep to the right.
iTrader: (10)
Join Date: Jul 2001
Location: Mascoutah, IL
Posts: 793
Likes: 0
Received 0 Likes
on
0 Posts
Maybe you can't find it becuase the last person to talk about it used a vague message title like "I can't seem to find it." You are doing nothing to help search function users of the future.
#3
Lives on the Forum
Join Date: Dec 2001
Location: San Lorenzo, California
Posts: 14,716
Likes: 0
Received 8 Likes
on
8 Posts
Changing the rack to a 2nd gen rack is dumb. Send your rack out to Maval Gear for a true manual conversion. Unfortunately the search database appears to be missing a lot of info. Give Maval Gear a call....it will be about $280.
#4
Full Member
Thread Starter
Join Date: May 2004
Location: MN
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info, but I already have the 2nd gen rack sitting under my 20b. I was trying to search for an old thread, that I thought, stated I would need new ball joints.
Any info would be appreciated.
Any info would be appreciated.