ILMM Pt.1 Need help with Electric Connectors
03-06-04, 08:48 PM
#1
Forever Modified
Thread Starter
iTrader: (1)
Join Date: Dec 2003
Location: WA
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
ILMM Pt.1 Need help with Electric Connectors
I'm losin my mind Pt. 1
I've been working on my rx7 for a while now slowly but surely, taken my time since it is a weekend project.
I posted a while back that I busted the two electric connectors that go into the solenoid valves because over time they became too brittle. There are 2 plugs one for each solenoid valve. Well anyways I need some help desperately as I have used all the resources I could find and still could not come up with an answer. Basically It would be a great favor and much appreciated if someone could check the wire colors for me, Here is what I need to know.
There are two plugs one for the solenoid valve turbo precontroller, Red (J), and a second plug for the solenoid valve waste gate controller, Blue (I), in attachment 2 below. I need to know the colors of the wire ie (black with brown stripe, ect>) I need to know what wire color is for the right and what wire color is for the left for each solenoid valve. The first attachment is of the plugs, the third attachment is of the plug chart.
I've been working on my rx7 for a while now slowly but surely, taken my time since it is a weekend project.
I posted a while back that I busted the two electric connectors that go into the solenoid valves because over time they became too brittle. There are 2 plugs one for each solenoid valve. Well anyways I need some help desperately as I have used all the resources I could find and still could not come up with an answer. Basically It would be a great favor and much appreciated if someone could check the wire colors for me, Here is what I need to know.
There are two plugs one for the solenoid valve turbo precontroller, Red (J), and a second plug for the solenoid valve waste gate controller, Blue (I), in attachment 2 below. I need to know the colors of the wire ie (black with brown stripe, ect>) I need to know what wire color is for the right and what wire color is for the left for each solenoid valve. The first attachment is of the plugs, the third attachment is of the plug chart.
03-07-04, 12:17 AM
#2
Freudian slip
iTrader: (1)
Join Date: Aug 2002
Location: Pocatello, ID
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
Your attachment didn't work for me.
But the answer to your question is in the shop manual pg. Z-32 in the wiring diagrams.
Turbo pre-control is blue/yellow and black/white. Wastegate control is blue/white and black/white.
If that doesn't work for you, then let me know and I can dig up my old harness that I took out and check for sure.
But the answer to your question is in the shop manual pg. Z-32 in the wiring diagrams.
Turbo pre-control is blue/yellow and black/white. Wastegate control is blue/white and black/white.
If that doesn't work for you, then let me know and I can dig up my old harness that I took out and check for sure.
