93BlackFD

i can't get through the damn firewall for my boost gauge line anyone want to show me visuals of where i can get through??

nmo93

most guys run the vacuum hose and wires through the driver side fender. Run your hose behind the brake booster and through the large hole in the driver's fender near the firewall (behind the cruise control if you have it). Undo the rear of the plastic fender liner and just above the oil coller outlet you'll find a blank plug in the firewall that leads into the passenger compartment behind the top of the fuse box.
nick

93BlackFD

anyone have pics?

nmo93

you can't miss the hole, but check out this site:
http://www.rx7turboturbo.com/robrobi...ge_install.htm

ttRx7racer

We did basically what he said but we had to drill a little, I dont have a dig so pics would take ma a while to get.

93BlackFD

yeah i'm lacking a drill too

rynberg

Just run the tubing/wiring through the steering column boot.

rotary-tt

I drilled a small hole just below the master cylinder although that requires a drill

93BlackFD

i have no flashlight and need a detailed pic anyone want to post

apneablue

This is what I did...Used a dremel and cut a 1" diameter hole and it's enough for all my gauges and whatever else to go thoughr...it comes out right below the master cylinder...