Got hit, Need help
03-12-04, 09:33 PM
#1
Senior Member
Thread Starter
Join Date: May 2003
Location: CHINO HILLS,SO CAL
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Got hit, Need help
Well unfortunately a guy pulled out in front of me today and we connected. right front is what hit and the bumper, fender, hood, headlight assm., etc are toast. the guy is going to pay for everything so im not too worried since the damage isnt too bad. it looks like i need to replace the frame piece that goes around the headlights and the rebar in the front and was wondering if any of you knew of a good place to get the parts and a shop here in socal that will give me a PROFESSIONAL appraisal. i remember seeing some guy on here that replaced these same pieces and it came out well. any input would be appreciated. thanks
03-12-04, 09:54 PM
#4
I need more black paint..
iTrader: (3)
Join Date: Dec 2001
Location: Redlands CA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to hear about this, accidents are always unpleasent to say the least. The hood is really expensive (~$800) from Mazda, and its aluminum so I few if any shops will work on it. I was hit in the snow, the guy put a dent in my hood punched a hole in the headlight cover. The total work for the two was estimated at about $1,500, including parts and labor. I suggest getting an aftermarket or used hood, and getting some used fenders. I don't know about the sub frame, and I don't know any shops down towards Chino or Riverside that do good work, so I'm afraid I can't help you out with those.
03-12-04, 11:38 PM
#5
PART NUMBER 53-140B OR 54-140A depending on side. get it new from mazda its only like 70 bucks or so. im not a big fan of aftermarket frame/body parts. its called the shroud panel i know what your talking about. My FD has a brand new front end...core support, crosmember, sub frame, im pretty familiar with the front end body parts so let me know. i can try to help you out.
03-12-04, 11:41 PM
#6
btw if your looking for a bomb *** body man who works on fd's let me know. its in vegas but well worth it IMO. hes done all my cars. hes redone a couple of wrecked fd's. and the chasis is straight as an arrow.
Trending Topics
03-13-04, 12:49 AM
#9
Senior Member
Thread Starter
Join Date: May 2003
Location: CHINO HILLS,SO CAL
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
heres some pics of the damage:
well i think im goign to need a core support and the frame pieces that the fender mounts to as well, possibly a new rebar too. i figure ill just do the 99 spec conversion now while im here since it will come w/ the rebar. so if anyone here has a 99 spec laying around ill probably pick it up. i also figured that since my paint was looking real bad i would paint the whole car while im at it as well. now the question is....what color. thanks for the prt#s, if you could post some more pics of those pieces or the other prt#s i may need that would be great. thanks guys for helping a fellow fd stay on the road!
well i think im goign to need a core support and the frame pieces that the fender mounts to as well, possibly a new rebar too. i figure ill just do the 99 spec conversion now while im here since it will come w/ the rebar. so if anyone here has a 99 spec laying around ill probably pick it up. i also figured that since my paint was looking real bad i would paint the whole car while im at it as well. now the question is....what color. thanks for the prt#s, if you could post some more pics of those pieces or the other prt#s i may need that would be great. thanks guys for helping a fellow fd stay on the road!
Last edited by hyper7; 03-13-04 at 12:55 AM.
03-13-04, 01:00 AM
#11
Senior Member
Thread Starter
Join Date: May 2003
Location: CHINO HILLS,SO CAL
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
you know it does suc but its not worth getting all stressed about since i know it will get fixed. He works two building down from me, and was saying how sorry he was for two hours i was talking to him. **** happens!
03-13-04, 01:51 AM
#12
theres two parts with the same name---crosmember one is the bar that runs betewen your frame infornt of the motor and the other is the one that supports the front of your car. the part# for the front one is 53-162 I got mine from mazda for 190$ and the part that you refer to as holding your fender there are 2 pieces the one that holds your shock tower and is welded to your frame is the part# 53-210b or 53-210x then there is a part that comes off of that which is #53-285 or 54-285 which is spot welded to the headlight shroud (the part listed earlier) which then goes to your core support/ cross member for the front. ill post pics of both for you.
03-13-04, 01:54 AM
#13
and here you go! dont worry mine is a HELL OF A LOt WORSE. it can be fixed. i just know that i prolly would of fucked the guy up depending on situation. if he was young..yea if he was older and a ***.yeah if he was older and nice i prolly would have yelled a him. if it was a woman my girl woulda kicked her ***! lol dont worry ill help you get your parts sorted out.
03-13-04, 02:11 AM
#15
Senior Member
Thread Starter
Join Date: May 2003
Location: CHINO HILLS,SO CAL
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
thanks a lot for your help. its a good thing i started a wholesale account with mazda so i can get all the parts together for a good price. so far i think ill need the crossmember, the shroud, and the rebar. so...color? i was thinking winning blue perhaps
maybe laguna seca blue...
maybe laguna seca blue...
03-13-04, 02:27 AM
#17
you know what i considered as a color is the velocity red mica. from the rx8. the body lines or the rx7 would set it off! im kinda stuck between 3 colors. Saphire blue pearl from the LTD supra, velocity red mica or CYM. the saphire is nice
03-13-04, 02:44 AM
#18
Senior Member
Thread Starter
Join Date: May 2003
Location: CHINO HILLS,SO CAL
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
so here are my color choices:
-yellow (w/ a little pearl to it)
-is300 white pearl
-rx8 winning blue
-possibly a reddish orange color
-laguna blue
heres the reddish orange color
either color i paint it, i will be painting my r6 the same color
-yellow (w/ a little pearl to it)
-is300 white pearl
-rx8 winning blue
-possibly a reddish orange color
-laguna blue
heres the reddish orange color
either color i paint it, i will be painting my r6 the same color
03-13-04, 06:28 AM
#19
PV = nRT
Join Date: Jan 2003
Location: New Zealand (was California)
Posts: 2,250
Likes: 0
Received 0 Likes
on
0 Posts
Doesn't really look that bad honestly.
Replace the standard body parts and match paint. I don't think there was any serious damage even done to the support metal underneath.
Replace the standard body parts and match paint. I don't think there was any serious damage even done to the support metal underneath.
03-13-04, 12:19 PM
#21
Planning my come back
iTrader: (7)
Join Date: Feb 2003
Location: Austin, Tx
Posts: 3,393
Likes: 0
Received 0 Likes
on
0 Posts
what you crazy? why in the hell you want to change the color of a silver FD? That's kinda a unique color. but I would go with a different type of silver like the one Mercedez have or like a darker silver (kinda like gun metal).
03-13-04, 01:00 PM
#22
man he hit your silver FD. I would have came outta your car swingin. I would be pissed off. Get it appraised and have his insurance company give you the cash. Buy cheap parts online here and make money!
P.S. tell the insurance company that when he hit you he knocked off your single turbo, front mount, radiator, and flux capacitor!
P.S. tell the insurance company that when he hit you he knocked off your single turbo, front mount, radiator, and flux capacitor!
03-13-04, 01:08 PM
#23
The hit aint that bad IMO. Seems almost nothing underneath is damage.....from the picture, so it shouldn't be that bad. I just wanna say too bad your car got hit, but look in a better way that it coulda been worst!
03-13-04, 05:12 PM
#24
Senior Member
Thread Starter
Join Date: May 2003
Location: CHINO HILLS,SO CAL
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
i do want to change the color because im really sick of silver not to mention my paint was **** to begin w/ and it seems silver paint doesnt last as long as others. so do you guys know of a good shop that would be able to give me a good appraisal? i need to start figuring out prices for the damage. i think i can also fix the damage myself to cut down costs for other parts....99 spec or something!
