Flooding Problem
#1
Rotary Enthusiast
Thread Starter
iTrader: (6)
Join Date: Aug 2001
Location: Cincinnati
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
Flooding Problem
I have read several posts but I am still having a problem:
I performed the ATF trick and the motor fires right up but after about 10 seconds it just die's. Sometimes it fires back up but usually it just spins and wont fire.
It is an automatic 93.
Anyone got any advice.
Thanks
Chris
I performed the ATF trick and the motor fires right up but after about 10 seconds it just die's. Sometimes it fires back up but usually it just spins and wont fire.
It is an automatic 93.
Anyone got any advice.
Thanks
Chris
#6
Senior Member
check for engine codes
i had a starting problem similar, turned out to be the crank angle sensors were dirty, cleand them off for the heck of it.
new spark plugs? check plugs for spark,
plug wires? check wires for spark
ohm out coil packs for correct resistance.
try deflooding it and cleaning ur plugs.
test fuel pressure. regulated and unregulated.
could be the FPR
could be leaky injector
test as much of this as you can and let us know.
thanks
could be
i had a starting problem similar, turned out to be the crank angle sensors were dirty, cleand them off for the heck of it.
new spark plugs? check plugs for spark,
plug wires? check wires for spark
ohm out coil packs for correct resistance.
try deflooding it and cleaning ur plugs.
test fuel pressure. regulated and unregulated.
could be the FPR
could be leaky injector
test as much of this as you can and let us know.
thanks
could be
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
FbFuninthesun
New Member RX-7 Technical
3
10-06-15 08:03 AM
PinkRacer
2nd Generation Specific (1986-1992)
43
10-01-15 09:13 AM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM