HDP

iTrader: (2)

Does anyone know where I can find a write-up on installing the Lube Groove Delrin Bushings? I've searched but can't find anything on them. TIA.

2007 ZX-10

I wish the SuperPros were still available...I'll prob go Mazdaspeed

redlinewins

iTrader: (2)

Don't know links will help. I think you are asking about this kit.

https://www.rx7club.com/3rd-generation-specific-1993-2002-16/delrin-suspension-bushing-group-buy-announcement-506706/

http://www.torquecentral.com/showthr...829#post345829

HDP

iTrader: (2)

Well, it appears all the links that had pics and details of installs have been deleted... thanks anyway.

redlinewins

iTrader: (2)

I have this kit and it doesn't come with install instructions. You install as if you where replacing the bushings stock and using the color coded zip ties will tell you where they go. The kit came with a can of lube in which you apply where the groves are. You use a anti-seize compound on the outside of the bushing before pressing them in.

Link shows the bushings installed on the control arms and diff bar.

https://www.rx7club.com/race-car-tech-103/94-rx-7-track-car-project-begins-506890/page2/

2007 ZX-10

anyone who has had these things installed for a significant period of time (> two years) have any comments on maintenance/noise?

BryanDowns

iTrader: (2)

I've had mine in for nearly 2 years now. They are still working. They do creek and rattle a bit in the winter (I guess because they are cold...) In the summer there isnt a whole lot of noise.

Were I redoing it, I would have put zerks in. Other than that, I dont have any negatives to report.

Blackadde///

iTrader: (27)

https://www.rx7club.com/suspension-wheels-tires-brakes-archive-112/how-remove-replace-suspension-bushings-648765/