Boost Leak - Diagrams + sites?
#1
Full Member
Thread Starter
Join Date: Mar 2005
Location: Winnipeg, Canada
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Boost Leak - Diagrams + sites?
I have been searching alot regarding my boost problems and i read alot about how helpful this site is http://home.istar.ca/~dvandit/rx7stuff.shtml
EXCEPT it is not there, where could i find the same info?
I have found this one incase anyone looks at this
http://www.autosportracetech.com/RX-...leshooting.htm
Could this be it.
Also is there a Diagram that would show where this is:
No vacuum to the Turbo Control Solenoid / Actuator is a common failure. This is typically caused by the one-way valve that supplies vacuum to the Turbo Control Solenoid / Actuator through the Vacuum Chamber. The one-way valve will leak, allowing manifold pressure to leak into the vacuum while under boost.
I just want to understand as much as I can before I get at it, because I know I will get confused with all the lines.
Thanks Ryan
EXCEPT it is not there, where could i find the same info?
I have found this one incase anyone looks at this
http://www.autosportracetech.com/RX-...leshooting.htm
Could this be it.
Also is there a Diagram that would show where this is:
No vacuum to the Turbo Control Solenoid / Actuator is a common failure. This is typically caused by the one-way valve that supplies vacuum to the Turbo Control Solenoid / Actuator through the Vacuum Chamber. The one-way valve will leak, allowing manifold pressure to leak into the vacuum while under boost.
I just want to understand as much as I can before I get at it, because I know I will get confused with all the lines.
Thanks Ryan
Thread
Thread Starter
Forum
Replies
Last Post