3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Clutch Pedal feel suddenly changes for the worse.

Thread Tools
 
Search this Thread
 
Old 02-24-10, 02:58 PM
  #1  
R.I.P. Icemark

Thread Starter
iTrader: (2)
 
staticguitar313's Avatar
 
Join Date: Sep 2004
Location: gilbert, arizona
Posts: 4,229
Likes: 0
Received 1 Like on 1 Post
Clutch Pedal feel suddenly changes for the worse.

A few months ago I had the Clutch fork on my FD break. Recently I got around to replacing it. After the install the clutch was fairly easy to operate. Withing a days amount of driving it became very hard to push, yet sort mushy and the engagement is very abrupt. What could cause this to happen all of a sudden. The install went perfectly fine and the clutch even worked great for about a day. It still work but it feels horrible. The car is barely driveable. Let me know what you think. Car has a Spec Stage 2 clutch.
Old 02-24-10, 03:06 PM
  #2  
Original Gangster/Rotary!


iTrader: (213)
 
GoodfellaFD3S's Avatar
 
Join Date: Mar 2001
Location: FL-->NJ/NYC again!
Posts: 30,525
Received 538 Likes on 325 Posts
I'd recommend getting under the car and observe through the sight window while a buddy pushes the clutch pedal.
Old 02-24-10, 04:10 PM
  #3  
TurboRX7.com

iTrader: (6)
 
rdahm's Avatar
 
Join Date: Jul 2002
Location: Monroe MI
Posts: 682
Received 56 Likes on 15 Posts
I had a leaking clutch oil line. Similiar symptoms. less and less responsive, abrupt engagement. But considering you have other elements surrounding this, anything is possible.

I was sitting ready to turn a left on a 4lane road. I revved the car (enough apparently) that when my clutch line completely lost it, i stumbled out into traffic. yay.

In this situation, just check for oil or have a friend check while you press.

Good luck bro

*edit* i have a spec stage 2 clutch as well. so im familiar with the response you should have
Old 02-24-10, 11:35 PM
  #4  
R.I.P. Icemark

Thread Starter
iTrader: (2)
 
staticguitar313's Avatar
 
Join Date: Sep 2004
Location: gilbert, arizona
Posts: 4,229
Likes: 0
Received 1 Like on 1 Post
Originally Posted by GoodfellaFD3S
I'd recommend getting under the car and observe through the sight window while a buddy pushes the clutch pedal.
About to do this in a little bit.
Old 02-27-10, 03:01 PM
  #5  
R.I.P. Icemark

Thread Starter
iTrader: (2)
 
staticguitar313's Avatar
 
Join Date: Sep 2004
Location: gilbert, arizona
Posts: 4,229
Likes: 0
Received 1 Like on 1 Post
Clutch release bearing is rubbing on trans input shaft. Whats the best way to fix this. I imagine the trans is going to have to come back out. Anyone else ever experienced this?
Old 03-05-10, 12:15 AM
  #6  
R.I.P. Icemark

Thread Starter
iTrader: (2)
 
staticguitar313's Avatar
 
Join Date: Sep 2004
Location: gilbert, arizona
Posts: 4,229
Likes: 0
Received 1 Like on 1 Post
Anyone at all run in to this issue or have a fix for it?
Old 03-05-10, 08:37 AM
  #7  
Original Gangster/Rotary!


iTrader: (213)
 
GoodfellaFD3S's Avatar
 
Join Date: Mar 2001
Location: FL-->NJ/NYC again!
Posts: 30,525
Received 538 Likes on 325 Posts
Originally Posted by staticguitar313
Clutch release bearing is rubbing on trans input shaft. Whats the best way to fix this. I imagine the trans is going to have to come back out. Anyone else ever experienced this?
Are you sure it's rubbing? Sounds like something with the clutch fork. You're sure you securely bolted it down to the bellhousing?
Old 03-05-10, 08:58 AM
  #8  
DGRR 2017 4/26-4/30, 2017

iTrader: (13)
 
Herblenny's Avatar
 
Join Date: Nov 2001
Location: Alabama
Posts: 13,597
Likes: 0
Received 5 Likes on 4 Posts
I think its the SPEC stage 2... Buy an EXEDY Clutch

But seriously, I'm minutes away from SPEC clutch here in Alabama and I wouldn't not run spec. I've heard too many issues with them by local guys and also seen their clutches causing other parts fail. Also, they weren't too friendly about supporting the rotary community... actually, they don't support rotary communities. I've asked them first 3 years of DGRR to support the DGRR event, and without any luck.. and they are local! Put a bad taste in my mouth and I sold all the Spec clutches I had (2 of them). Also, Exedy clutch seems to have better fit and finish.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
Enzo1944
New Member RX-7 Technical
2
09-06-15 08:57 AM
Frisky Arab
2nd Generation Specific (1986-1992)
5
09-04-15 06:17 PM



Quick Reply: Clutch Pedal feel suddenly changes for the worse.



All times are GMT -5. The time now is 02:43 PM.