3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

Anyone know these connectors??

Thread Tools
 
Search this Thread
 
Old 01-07-07, 02:27 PM
  #1  
rx7 fanatic

Thread Starter
 
fastyoungone's Avatar
 
Join Date: May 2005
Location: norman,ok
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
Anyone know these connectors??


On this one you are looking at the white connector that is sitting on top of the starter. You can see it wraps into the starting harness right next to it.



There are three connectors in this pic. The first one on the left comes from the harness behind the alternator and is a black wire with red dots. The other two come out of the ignition part of the harness that has the coils, starter etc. After looking at the wiring diagram I know that one of them is the clutch that was used on the a/c. But as for the first pic and the other two on this I do not know.
things that are relevent: 93 touring auto, a/c and emissions have been removed. single turbo,stock comp with PFS.(running at about 10-11 psi so I don't get flamed )
Old 01-08-07, 09:07 PM
  #2  
rx7 fanatic

Thread Starter
 
fastyoungone's Avatar
 
Join Date: May 2005
Location: norman,ok
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
bump
Old 01-08-07, 10:00 PM
  #3  
Mr Sparkles

iTrader: (12)
 
Chadwick's Avatar
 
Join Date: Jun 2001
Location: Smyrna, TN, USA
Posts: 785
Likes: 0
Received 1 Like on 1 Post
The bottom picture, the 2 black ones plug into each other, the white one plugs into the AC compressor
Old 01-08-07, 10:03 PM
  #4  
Mr Sparkles

iTrader: (12)
 
Chadwick's Avatar
 
Join Date: Jun 2001
Location: Smyrna, TN, USA
Posts: 785
Likes: 0
Received 1 Like on 1 Post
From the top picture it is hard to tell, but I think it might be the oil level sending plug.
Old 01-09-07, 04:07 AM
  #5  
rx7 fanatic

Thread Starter
 
fastyoungone's Avatar
 
Join Date: May 2005
Location: norman,ok
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Chadwick
The bottom picture, the 2 black ones plug into each other, the white one plugs into the AC compressor
mind telling me what that black to black connection is? I can't pinpoint it in the wiring diagram. Also, do you know where the white plug in the top pic is supposed to go? thanks!!
Old 01-09-07, 08:43 PM
  #6  
rx7 fanatic

Thread Starter
 
fastyoungone's Avatar
 
Join Date: May 2005
Location: norman,ok
Posts: 201
Likes: 0
Received 0 Likes on 0 Posts
Not that I don't trust Chadwick, but can anyone else confirm this or tell me what that connector is? It might help me solve my problems......




All times are GMT -5. The time now is 12:02 AM.