Amemiya V-mount install?
#1
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Scottsdale, AZ
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Amemiya V-mount install?
Trying to install the RE-Amemiya V-mount IC and running into probs. Anyone install this exact kit, or have pics of it installed? I've already seen all the pics of Rotary Extreme's and I don't need those...
#3
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Scottsdale, AZ
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
I have the Greddy Airinx intake and I can't seem to make it fit with the IC. However, I have seen 1 or 2 pics of this combination, but they were from a bad angle (so I couldn't see how it was done). Also, I'm looking for a couple pics of the radiator installed (before the IC is on the car), so I can get a general idea of how it will be mounted (along with the A/C and radiator fans)...
Last edited by turbox2; 02-18-04 at 11:34 PM.
#7
Junior Member
Thread Starter
Join Date: Dec 2002
Location: Scottsdale, AZ
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, fitment issue with the intake. I'd just be interested in hearing what intakes other people are using with this IC, but I haven't found anyone else who is using it...
Trending Topics
#10
Rotary Enthusiast
you can chop the airnix pipe to make it shorter and come closer to the turbo/turbos. I would help if you posted your whole setup too, cause if you have a T-78 or something, you could just throw the filter on the turbo without the intake tube.
If you have the stock twins you can always measure the diameter of the intake tube and go to an exhaust shop and have them bend you a set of pipes if you give him the measurements if you want the filters to go behind the passenger headlight.
If you want more help, a little more description would help
If you have the stock twins you can always measure the diameter of the intake tube and go to an exhaust shop and have them bend you a set of pipes if you give him the measurements if you want the filters to go behind the passenger headlight.
If you want more help, a little more description would help
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM