Aftermarket Hood and washer "squirters"
#1
Rotary Enthusiast
Thread Starter
Join Date: Jul 2002
Location: North Carolina
Posts: 863
Likes: 0
Received 0 Likes
on
0 Posts
Aftermarket Hood and washer "squirters"
For all you guys with aftermarket hoods, particularly the Seibon hood......are there provisions to mount the squirters? If not what did you do?
Enquiring minds want to know!!
TIA
Enquiring minds want to know!!
TIA
#2
Vrooooom....PSHT
Join Date: Jun 2006
Location: Lisbon/Sussex, WI
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
I have a ViS scoot style hood and it has the slots for washer nozzles, I bought new ones since my old ones where so nasty. Just a bit of a pain in the **** to install.
#3
Eye In The Sky
iTrader: (2)
Join Date: Feb 2001
Location: In A Disfunctional World
Posts: 7,892
Likes: 0
Received 114 Likes
on
66 Posts
My Mazda Speed replica did not have the holes. Being it was two layers with spacing between them in that area, I decided it was too hazardess to drill there.
I replaced the driver side wiper arm with a passenger side arm. Then I installed GM squirters that snap onto the arms. Does not spray as well, but works.
I replaced the driver side wiper arm with a passenger side arm. Then I installed GM squirters that snap onto the arms. Does not spray as well, but works.
#4
4th engine's the charm
iTrader: (1)
Join Date: Nov 2005
Location: St. Marys, MD
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
I had a seibon cf hood and the holes were actualy too big for the squirters.... so in essence I never figured out how to mount them... thats before i sold the hood and got a VIS scoot styled hood. The squirters fit right into the scoot hood
Trending Topics
#9
sorry to bring this thread up form the dead but i am now faced with the same issues as the OP.
I just fitted a seibon ks bonnet and the holes are too big for the oem mazda jets.. they just drop in, not snug at all and you can just flick them out :/
Im thinking im going to have to get some aftermarket jets then :/ Since the last time this thread was posted have other people ran into this problem and did you fix it! Right now i have no jets in there and its annoying me.
I just fitted a seibon ks bonnet and the holes are too big for the oem mazda jets.. they just drop in, not snug at all and you can just flick them out :/
Im thinking im going to have to get some aftermarket jets then :/ Since the last time this thread was posted have other people ran into this problem and did you fix it! Right now i have no jets in there and its annoying me.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM