About to destroy my door panel
#1
Full Member
Thread Starter
Join Date: Mar 2003
Location: san francisco, Ca
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
About to destroy my door panel
Alright one day i got to open my passenger side door and nothing happens when i pull. It has tension but it just won't open. I get into the driver side and try to open through the inside and well nope nothing happens.
Assuming i need to get the door panel off to inspect the wire that opens the door...how do i get it off without destroying my door panel and if i do need to destroy it where can i find a cheap replacement?
Any ideas are appreciated and oh i also already searched with no avail.
thanks
Assuming i need to get the door panel off to inspect the wire that opens the door...how do i get it off without destroying my door panel and if i do need to destroy it where can i find a cheap replacement?
Any ideas are appreciated and oh i also already searched with no avail.
thanks
#5
Forever Modified
iTrader: (1)
Join Date: Dec 2003
Location: WA
Posts: 1,423
Likes: 0
Received 0 Likes
on
0 Posts
Ha ha ha, he he he, I'm sorry I am going to have to laugh. THat crap happens to me all the time. Even worse on the driver side. Its those cheesy door handle locks, I mean don't get me wrong they look hella nice and all but they sure the hell can annoy a person.
Well anyways It happened to me a couple of times on the driver side and it was a bitc* I had to basically do what that link speedking gave you only with the door shut. First thing make sure the locking mechanism is all the way on open, then try and open your door, If not remove the door lock & handle, that should be easy enough and see if you can pull the metal line with your hand and see if your door pops open. It could be that the lever just got stuck. And if all else fails just pull out the damn door panel, it shouldn't break at all just take your time, and see what is holding the door from opening.
Well anyways It happened to me a couple of times on the driver side and it was a bitc* I had to basically do what that link speedking gave you only with the door shut. First thing make sure the locking mechanism is all the way on open, then try and open your door, If not remove the door lock & handle, that should be easy enough and see if you can pull the metal line with your hand and see if your door pops open. It could be that the lever just got stuck. And if all else fails just pull out the damn door panel, it shouldn't break at all just take your time, and see what is holding the door from opening.
#7
Rotary Enthusiast
Join Date: Mar 2003
Location: STL Area
Posts: 931
Likes: 0
Received 0 Likes
on
0 Posts
If both doors don't open, be a redneck and get in and out of the car through the trunk. HAHA. Jokin'. I like hillbillies. Well, good luck to you. I know nothing of doors so my guess, if u want to fix it, break the door off and replace wats broken.
Trending Topics
#9
Porn Star
iTrader: (1)
Join Date: Jan 2004
Location: Connecticut
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SpeedKing
http://www.carstereohelp.com/stereor...zRX7FDrPnl.htm
http://www.carstereohelp.com/stereor...zRX7FDrPnl.htm
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM