3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

1st time it wont start...

Thread Tools
 
Search this Thread
 
Old 03-08-04, 07:26 PM
  #1  
Full Member

Thread Starter
 
MADBOOST's Avatar
 
Join Date: Jun 2003
Location: minnestota
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
1st time it wont start...

i live in MN and there is plenty of snow and this year i havent found shelter for my FD but weird thing is, i never had a start problem and the 1 night it does sleep in the garage the F ing thing wont start.. but it started once when i had to move it back a foot to open the fridge door 1st try like always, then the next day the thing juss wont start. is this a common problem with these things? what should i do? i thought maybe i flooded it somehow, prolly not but i didnt know where else to start but checkign the spark plugs. if i did flood it it wont do a rolling clutch start right? kuzz of fuel injection? or is it somehow different for rotories? how the f do i get to the spark plugs? do i go from under the car? i cant even see them, its like rocket sugery......

i would appreciate any input from any1... i dont know wtf im doing... thanx

dam thats a lotta text
Old 03-08-04, 07:40 PM
  #2  
Senior Member

 
J.S.J's Avatar
 
Join Date: Nov 2003
Location: Irvine, California
Posts: 599
Likes: 0
Received 0 Likes on 0 Posts
wont start

normally when you start a rotary for just a short time running it can flood. I would use the search for the best things to do but you can try to hold the throttle down while cranking, this will lean out the A/F ratio/injector pulse and it may start.
Old 03-08-04, 07:56 PM
  #3  
Full Member

Thread Starter
 
MADBOOST's Avatar
 
Join Date: Jun 2003
Location: minnestota
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
are you serious? how far down should i push it? i thought this is how you flood it? i already tried that but i only puched a little should i push it down all the way or what?
Old 03-09-04, 07:56 AM
  #4  
Full Member

Thread Starter
 
MADBOOST's Avatar
 
Join Date: Jun 2003
Location: minnestota
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
bump.
Old 03-09-04, 08:21 AM
  #5  
Racecar - Formula 2000

 
DaveW's Avatar
 
Join Date: Sep 2002
Location: Bath, OH
Posts: 3,849
Received 277 Likes on 198 Posts
Flooding is a normal result when a rotary is started and then shut off cold.

Please use the search function. There must be 500 threads on flooding.
Old 03-09-04, 10:15 AM
  #6  
Da RX7 iz my Mistress

 
Runnin Away's Avatar
 
Join Date: Dec 2001
Location: San Antonio, Texas
Posts: 381
Likes: 0
Received 0 Likes on 0 Posts
haha that happened to me i checked my fuel pump fuse blown and flooded engine..try that for ***** and giggles...start the car with the accelerator all the way down and keep doin it till it starts..pretty much..
Old 03-09-04, 06:41 PM
  #7  
Full Member

Thread Starter
 
MADBOOST's Avatar
 
Join Date: Jun 2003
Location: minnestota
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
thanx a lot guys, it took a lotta doin but it finally started.... i woulda never thought to keep floorin it and keep crankin it....

hey while you guys are being so helpfull.... i took a real hard sideways turn and ever since that i only get partial boost at 4500... i figure its a hose somewherez kuzz it still bossts after 45, juss like half or so power tho... any suggestions on where to look b4 i bring it back to the dealer and have them overcharge me for plugin a hose back in
Old 03-09-04, 06:44 PM
  #8  
Full Member

Thread Starter
 
MADBOOST's Avatar
 
Join Date: Jun 2003
Location: minnestota
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
why am i still on page 2?

bump....
bump....
Old 03-09-04, 06:56 PM
  #9  
Full Member

Thread Starter
 
MADBOOST's Avatar
 
Join Date: Jun 2003
Location: minnestota
Posts: 190
Likes: 0
Received 0 Likes on 0 Posts
can some1 tell me wtf the black envelope is on my thread that wont let me bump up?

is that the sectret mark for noob threads hahaha
=/
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lt1_rx7
Blue Ridge Rotary Run
46
10-09-15 03:11 PM
craaaazzy
Comments and Suggestions Archive
3
08-21-15 02:00 PM
Marty RE
New Member RX-7 Technical
0
08-13-15 11:19 AM



Quick Reply: 1st time it wont start...



All times are GMT -5. The time now is 05:30 AM.