Angel eyes for Sleek headlights
#1
Pro Graphic designer
Thread Starter
Angel eyes for Sleek headlights
Has anyone tried to add angel eyes/halos to EVO-R 90mm headlights?
Just wondering if there's enough room to fit those rings from ebay.
Even though the headlights are 90mm, the outer diameter is a bit large imo.
So wondering which diameter rings fits well and if it's possible to fit without cutting anything.
Just wondering if there's enough room to fit those rings from ebay.
Even though the headlights are 90mm, the outer diameter is a bit large imo.
So wondering which diameter rings fits well and if it's possible to fit without cutting anything.
#3
Lives on the Forum
iTrader: (6)
Should be an easy task to accomplish. There are a bunch of companies that make angel eye LEDs in various sizes. Here is a link to the ones I recommend. They are from Morimoto:
https://www.theretrofitsource.com/le...o-xsb-3-0.html
You can measure the outside of the EVO-R 90mm lights and then select accordingly. Very easy to install. Here is a video of the Morimotos I used in my 99 spec turn signals. Good to 1:22. Very bright and good quality:
https://www.theretrofitsource.com/le...o-xsb-3-0.html
You can measure the outside of the EVO-R 90mm lights and then select accordingly. Very easy to install. Here is a video of the Morimotos I used in my 99 spec turn signals. Good to 1:22. Very bright and good quality:
#5
Lives on the Forum
iTrader: (6)
They are 60mm and 70mm LED rings from The Retrofit Source. While the lights look simple, it took a crap load of work to reconfigure the turn signals. Here are some of the details:
https://www.rx7club.com/build-thread.../#post11897432
Whereas the angle of the EVO-R headlights is straight up (so you can just add in the angel eyes), the 99 spec units needs to be modified to properly set the rings.
https://www.rx7club.com/build-thread.../#post11897432
Whereas the angle of the EVO-R headlights is straight up (so you can just add in the angel eyes), the 99 spec units needs to be modified to properly set the rings.
Last edited by David Hayes; 01-23-17 at 07:37 AM.