Tower Bar from Ebay? And a Ebay Question
#1
Senior Member
Thread Starter
Join Date: Jul 2001
Location: Queens, NY-----Rockland, NY(School)
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Tower Bar from Ebay? And a Ebay Question
I was on Ebay and i used the option "buy right now" for the FC tower bars they have on there.
this was two days ago, now when i look in "my ebay" and its not there, but yesterday it was. what happens now? (i never tried to buy anything on ebay, only old.)
how are the tower bars? anyone get one?
this was two days ago, now when i look in "my ebay" and its not there, but yesterday it was. what happens now? (i never tried to buy anything on ebay, only old.)
how are the tower bars? anyone get one?
#2
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Check item to make sure you're bid got the item. Normally "e" Bay will send you a confirmation via e mail.
If it's yours, you need to contact the seller for their address and what type of payment they'll accept.
It's been a while since I purchased an item, but I believe if you are the high bidder, you can go through the e Bay sytem to make your contact.
If it's yours, you need to contact the seller for their address and what type of payment they'll accept.
It's been a while since I purchased an item, but I believe if you are the high bidder, you can go through the e Bay sytem to make your contact.
#6
Former Moderator. RIP Icemark.
This bar is the generic one that many people buy on ebay:
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1855632650
It is generally a decent bar, except for the mounting bolts for the strut frame to the bar. If you upgrade the bolts with new ones from your local hardware store, it is a very good cheapo bar.
See the allen head, that is what you want to upgrade as the ones the bars usually come with shear off at about 40 Ft/lbs of torque.
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1855632650
It is generally a decent bar, except for the mounting bolts for the strut frame to the bar. If you upgrade the bolts with new ones from your local hardware store, it is a very good cheapo bar.
See the allen head, that is what you want to upgrade as the ones the bars usually come with shear off at about 40 Ft/lbs of torque.
Last edited by Icemark; 08-31-02 at 12:18 PM.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
jbherri2
1st Generation Specific (1979-1985)
2
08-30-15 09:51 AM