bad ecu? [pictures]
08-24-12, 10:29 PM
#2
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
what made you want to take the Ecu out and take it apart?
..edit>ok I know now...the harness thing.sorry.
are there any burnt components on the "other side" of the ecu?.
Solder joints are usually pretty good from the factory.
..edit>ok I know now...the harness thing.sorry.
are there any burnt components on the "other side" of the ecu?.
Solder joints are usually pretty good from the factory.
Last edited by misterstyx69; 08-24-12 at 10:35 PM.
08-25-12, 09:00 AM
#6
Ban Peak
iTrader: (49)
How many of you have opened an ECU up before you came in this thread and made an assumption? I don't know why, but those are higher amperage points and are like that in every ECU I've opened. Notice the marker marks next to the points, it's like they were double checked during production.
Bad ecu's that I've opened up will have noticeably brnt resistors or parts on both sides of the board.
That ECU looks okay.
Bad ecu's that I've opened up will have noticeably brnt resistors or parts on both sides of the board.
That ECU looks okay.
08-25-12, 12:54 PM
#7
looks like an unmolested board and nothing jumps out at me either. burnt components will usually leave the board a brown in the affected area.
i have also never seen cold solder joints inside the ECU's.
i have also never seen cold solder joints inside the ECU's.
Last edited by RotaryEvolution; 08-25-12 at 12:56 PM.
Thread
Thread Starter
Forum
Replies
Last Post
befarrer
Microtech
3
08-22-15 05:52 PM
