What is this sensor? Is it needed.
#1
What is this sensor? Is it needed.
My sources tell me that it looks like a Fan Switch Sensor when comparing what it looks like in person and on Mazdatrix's website. I am running a black magic electric fan so it seems it wouldn't be needed. Any info would be greatly appreciated...
Also: The sensor plugs into a green wire with black clip as shown in the fourth photo if that helps
Also: The sensor plugs into a green wire with black clip as shown in the fourth photo if that helps
#6
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
As stated you can use the location for a temp switch for your new fan.
Even though the location only reads when the thermo is open I still like to use it for my aftermarket temp gauge.
If you think about it you really don't need to know if the engine is cold*(that would be obvious at start up)..only when the engine is Warm..or hot.
Even though the location only reads when the thermo is open I still like to use it for my aftermarket temp gauge.
If you think about it you really don't need to know if the engine is cold*(that would be obvious at start up)..only when the engine is Warm..or hot.
Thread
Thread Starter
Forum
Replies
Last Post
imitek
3rd Generation Specific (1993-2002)
24
12-01-15 03:35 PM
imitek
3rd Generation Specific (1993-2002)
3
09-22-15 11:29 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
09-19-15 07:13 PM