Mindspin311

Im pretty sure that my wheel bearing is gone but I currently have to drive home from school, 450mi each way and I dont have the money to fix it at the moment. How bad is it to be driving on it still?

xfeastonarsex

iTrader: (5)

If you can do it yourself it shouldnt cost more than $50 bucks and your time. Driving on a bad bearing that is obviously in bad shape isnt a good thing. The bearing could seize, etc.

Mindspin311

Where can I get the bearing from?

Wankel7

If it is your front bearing....

Just don't do it man. That is gonna be $$$$$. You could hurt the bearing race.

http://mazdatrix.com/h86-92bearings.htm

Wankel7

Oh, how do you know your bearing is fragged?

Have you checked the torque on the front nut with the cotter key in it? If it is your front bearing.

Turbonut

iTrader: (1)

From a previous thread, I think it's a rear bearing. PIA removing the assembly with the ABS sensor. Bearing has got to be pressed out.
No one can determine how long a bearing is going to last, especially one that is causing a vibration/making noise.
Good luck

Mindspin311

Its the rear one I belive, I take a right turn hard enough and whatever sound is back there goes away and returns once Im straight again

Wankel7

Isn't the rear bearing a complete unit with the race inside the unit?

So, if it shat then it would not hurt the tri point hub?

James

87GXLRX7

the rear bearing is a sealed bearing.. and cost me 90.cnd funds for the bearing and 75cnd funds, to get it installed...when i picked up the car they told me that the rear bearing was a real PITA and if he had to do it again it would be double for labour.