fc track videos
#1
fc track videos
I just thought Id share some track videos grip and drift in my fc. Car runs amazingly cool temps, and super reliable. Car sees alot of abuse, but I am still on the same 13b turbo 2 block for many years now..
Mods
garage life t2 Monster half bridgeport
RA seals
Microtech lt12s direct fire
Godspeed project mono rs coilovers
GSP radiator
GSP intercooler
GSP 50mm wastegate
TTI Turbo tech gt45 turbo
e85
Mods
garage life t2 Monster half bridgeport
RA seals
Microtech lt12s direct fire
Godspeed project mono rs coilovers
GSP radiator
GSP intercooler
GSP 50mm wastegate
TTI Turbo tech gt45 turbo
e85
#2
Rotisserie Engine
iTrader: (8)
Damn you really beat on that thing haha! Sounds good though. I need to figure out why I cant get my temps under control
Not nearly as exciting but when my car was NA and did my first track day: I start real slow, so skip to about 12 minutes, thats where I'm at pace...
Then I got tired of being slow...So I turbo'd it and 5 lug swapped it.
Now I'm just waiting to be able to afford to get back to the racetrack and do another track day!
Not nearly as exciting but when my car was NA and did my first track day: I start real slow, so skip to about 12 minutes, thats where I'm at pace...
Then I got tired of being slow...So I turbo'd it and 5 lug swapped it.
Now I'm just waiting to be able to afford to get back to the racetrack and do another track day!
#3
Fistful of steel
iTrader: (7)
Streets of Willow last year when I got the car running again:
Going off track a couple weeks ago at Willow Springs after it rained. I need to work on my GoPro mount.
Mods:
400whp LS1/T56 with Ronin Speedworks mounts
Ronin Speedworks 8.8 rear end conversion
All solid suspension bushings
Fortune coilovers
255/40/17 NT01 tires all around
Going off track a couple weeks ago at Willow Springs after it rained. I need to work on my GoPro mount.
Mods:
400whp LS1/T56 with Ronin Speedworks mounts
Ronin Speedworks 8.8 rear end conversion
All solid suspension bushings
Fortune coilovers
255/40/17 NT01 tires all around
#6
Senior Member
Not spectaculair yet. First vid on Zandvoort, Netherlands. Noise issues so the bung is in(thats why it sounds like a rocket) and also needed to wait till I passed the DB-meter before I could floor it towards start/finnish.
Second vid on the Nordschleife.
Car isn't tuned properly yet and in this vid you can see I am realy missing the power at some area's. Working on a major cooling upgrade this winter so I can go and set some lap times next year.
Second vid on the Nordschleife.
Car isn't tuned properly yet and in this vid you can see I am realy missing the power at some area's. Working on a major cooling upgrade this winter so I can go and set some lap times next year.
#7
B O R I C U A
iTrader: (14)
Streets of Willow last year when I got the car running again:
LS1 Rx7 - 3 laps around Streets of Willow 12/2013 - YouTube
Mods:
400whp LS1/T56 with Ronin Speedworks mounts
Ronin Speedworks 8.8 rear end conversion
All solid suspension bushings
Fortune coilovers
255/40/17 NT01 tires all around
LS1 Rx7 - 3 laps around Streets of Willow 12/2013 - YouTube
Mods:
400whp LS1/T56 with Ronin Speedworks mounts
Ronin Speedworks 8.8 rear end conversion
All solid suspension bushings
Fortune coilovers
255/40/17 NT01 tires all around
THIS!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
rx8volks
Canadian Forum
0
09-16-15 09:07 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM
rx8volks
Canadian Forum
0
09-01-15 10:46 PM