2nd Gen General Discussion The place for non-technical discussion about 2nd Gen RX-7s or if there's no better place for your topic
Sponsored by:

Speedo and trans help

Old 03-26-17, 06:59 PM
  #1  
Junior Member
Thread Starter
 
Rexythe13b's Avatar
 
Join Date: Feb 2017
Location: Canada
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Speedo and trans help

hey guys, I recently brought a new speedo driven gear for my 1986 n/a gx model and I tested it when I attached it to the cable. It worked fine when I tested it but now when I'm driving the car, I still get the tweeter beepin it's head off and the speedo still doesn't work. Any suggestions on what might be the problem AND how to remove the tweeter and it's whereabouts? Thanks for everything!!!!
Old 03-26-17, 07:56 PM
  #2  
Retired Moderator, RIP

iTrader: (142)
 
misterstyx69's Avatar
 
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes on 114 Posts
you sure it's speedo related IF the speedo now working?..maybe not orginally related.
That "tweeter" sound like a Buzzer?..if so it could be that your coolant level sensor at the top of your rad has it's Single wire either broken or disconnected from it..(or it's low in coolant).
Old 03-26-17, 08:15 PM
  #3  
Junior Member
Thread Starter
 
Rexythe13b's Avatar
 
Join Date: Feb 2017
Location: Canada
Posts: 16
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by misterstyx69
you sure it's speedo related IF the speedo now working?..maybe not orginally related.
That "tweeter" sound like a Buzzer?..if so it could be that your coolant level sensor at the top of your rad has it's Single wire either broken or disconnected from it..(or it's low in coolant).
the speedo isn't working. The gear was working when I spun it by hand but when I actually tightened it onto the trans it doesn't work


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:31 AM.