stickmantijuana

iTrader: (1)

If there is one thing that hasn't changed on my car, it is the stock steering in stock location. You must be remembering some other setup. Everything else on my car is changed at least once, and some parts more than 3-4 times.

just a word of advice.. unfortunately, there is no single kit for any proper swap. If you're heavily dependent on any single kit, your project is most likely doomed from the start. Get ready to do some work yourself or to spend some extra cash so you can hire a local shop who can actually finish a complicated car, know their way around your specific vehicle, and willing to put in the time to make it right. If there is nobody local, don't do it.

FwkUiWN

iTrader: (1)

you just basically modded the steering knuckle right? I've spent a lot of time looking into different setups and I know it won't mean much until I tear out the renesis and start mocking up the 20b.
I think I won't have a problem doing the swap. I just feel like I shouldn't necessarily have to reinvent the wheel either. I have the skills needed to fab and great friends willing to help.Thanks for the words of encouragement

Banzai-Racing

iTrader: (11)

Finally got the 20B out of our dyno building and cleaned up for spring.

stickmantijuana

iTrader: (1)

no change to steering knuckles. just had to cut the firewall and have a low profile oil pan made. I think you have the right attitude. if you're willing to put in the work, keep at it, it's doable. good luck and feel free to pm me any questions.

papsmagu

iTrader: (19)

man how did i miss this thread.....great looking rides. Mine is not an RX-7 but it was still born a rotary....

stokrx

man how did i miss this thread.....great looking rides. Mine is not an RX-7 but it was still born a rotary....

^^^

Wicked! I wish we got these pick-ups in OZ!

Monsterbox

iTrader: (6)

This is just outstanding

papsmagu

iTrader: (19)

thanks........i know you dont get the REPU but you guys get a **** load of other cool rotary powered mazda's

thanks..... been following your thread for some time in the sidelines......you have yourself a pretty sweet build there!

t-von

iTrader: (8)

Welcome my NA brother. You have the baddest 20b truck on the planet.

stickmantijuana

iTrader: (1)

i believe he meant to say the baddest truck on the planet.

silverfdturbo6port

iTrader: (26)

So much badass! We have a local that has a supercharged repu but nothing pretty unless you like rust

t-von

iTrader: (8)

Your right...good catch!

papsmagu

iTrader: (19)

^^^^ WOW, thanks for all the compliments guys....coming from you guys, they really mean a lot to me.

Narfle

iTrader: (16)

I'm not clear on the significance of a '72 hemi duster, except it sounds rare and clearly simon's truck is sweet. Can someone fill me in?

DgtlWar

Chanjun85, did I meet you out at P-Tuning a couple months ago?

changjune85

iTrader: (4)

Thats me

stickmantijuana

iTrader: (1)

did some wrapping, untucked wire harnesses, and installed boost controller.

silverfdturbo6port

iTrader: (26)

Few little things to do before I wire and fire.

papsmagu

iTrader: (19)

SOOOOOOOOO clean....awesome!

rx7jocke

still some work left but its closing in!

lomber13

My 1st gen

lomber13

1st gen

rorrazo18

iTrader: (1)

Now this is how i want mine to look like!!! Super nice!!! You are the first oerson i see with a vmount. Thought it couldnt be done. More info in hiw you fitted everything please?

silverfdturbo6port

iTrader: (26)

Thanks
Check out my build thread in my signature

LongsTurboFB

iTrader: (4)

My 3Rotor FC (AKA The REDDEVIL )