paximus

iTrader: (1)

i hope its cool that i post this here, but...
i'm finally getting somewhere on the project, but have a few questions and need a few parts. i searched, but couldn't find what i'm looking for. i also have a few things that i dont need if any of you are interested.

i'm looking for:
top feed (1600cc) secondary fuel rail. K2RD has been down for a while and i'm not sure where else i can one, any ideas?
20b alternator (i hear they push a little more than an fd unit)
20b starter
20b AFM (sillbeer still have yours?)

20b things i have than i dont need:
20b low mileage non-sequential turbos/manifold/and downpipe
20b throttlebody
20b modified (cut) stock elbow
fd engine harness modified for 20b

and finally, a little bonus for reading my thread j/k look how shiny!!

t-von

iTrader: (8)

Damn thats nice! The Fd's alternator is stronger. It's 100 amps while the 20b is 90.

paximus

iTrader: (1)

for some reason i thought it was the other way around...

anyway, i really would like to get a secondary fuel rail from somewhere... ideas anyone?

i'm not too concerned about selling the other stuff, they're just collecting dust so i thought i'd throw them up if anyone was in need.

Turbo 3

iTrader: (3)

you can use the stock starter either from an FD or a FC to start the 20B.

We just used my stock 2ndary fuel rail and fit the 1600's into it. Although we did cut off the end with the stock FPR it's near original.