Rat’s nest removal AC vacuum lines
#6
Rotary Enthusiast
iTrader: (17)
Maybe I've misunderstood the question.
There are 2 ports on the AC solenoid, one is connected to the vac source, and the other is connected to the throttle opener.
There should not be a tee with 2 of the lines going to the solenoid.
From the vac source you might have a tee, if you have AC and cruise control, with one line going to the AC solenoid, and the other going to the cruise control.
If you are not keeping AC, or cruise, just cap it at the carb, as Jesse has stated.
There are 2 ports on the AC solenoid, one is connected to the vac source, and the other is connected to the throttle opener.
There should not be a tee with 2 of the lines going to the solenoid.
From the vac source you might have a tee, if you have AC and cruise control, with one line going to the AC solenoid, and the other going to the cruise control.
If you are not keeping AC, or cruise, just cap it at the carb, as Jesse has stated.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM
12abridgeport
1st Generation Specific (1979-1985)
2
08-17-15 06:28 PM