Recommendable Electric Fuel Pump 3.5 to 4 psi for Datsun 240z with dual SU carbs
#1
Can Post Only in New Member Section
Thread Starter
Join Date: Jun 2015
Location: Panama
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Recommendable Electric Fuel Pump 3.5 to 4 psi for Datsun 240z with dual SU carbs
Have seen different options for replacing my AIRTEX 8012S 5.5 to 9psi electric fuel pump for my 1972 240z. I am narrowing my decisión to the following:
Facet Electric Fuel Pump
1x Facet 476087 Silver Top Cylindrical Fuel Pump (STS504) (Facet STS504) from Green Spark Plug
or
Carter Electric Fuel Pump - In-Line Part Number: 8566-03413007
79 1979 Mazda RX7 Fuel Pump - Fuel Delivery - AC Delco, Airtex, Autobest, Carter, Delphi, Mr Gasket, Precise, In-Line - PartsGeek
I need a pump that dials between 3.5 to 4 psi!! No more than this. It needs some power but not over 4 psi and that does not require a regulator.
If there is any other better recommendations than any of these let me know also.
Facet Electric Fuel Pump
1x Facet 476087 Silver Top Cylindrical Fuel Pump (STS504) (Facet STS504) from Green Spark Plug
or
Carter Electric Fuel Pump - In-Line Part Number: 8566-03413007
79 1979 Mazda RX7 Fuel Pump - Fuel Delivery - AC Delco, Airtex, Autobest, Carter, Delphi, Mr Gasket, Precise, In-Line - PartsGeek
I need a pump that dials between 3.5 to 4 psi!! No more than this. It needs some power but not over 4 psi and that does not require a regulator.
If there is any other better recommendations than any of these let me know also.
#4
Rotary Enthusiast
The stock S2 RX-7 fuel pump is adequate for a 13B rotary with dual SU carbs. The carbs I used are late-1980's vintage HIF-6, with fuel return line. The 240z carbs are an older design and smaller.
#5
carb whisperer
I almost bought a twin SU intake set up a couple of years ago, but it turned out to be a scam...
And that Carter pump would be perfect. Its a little noisy though.
I like the weber redline series 8mm inlet and outlet pump too...
Thread
Thread Starter
Forum
Replies
Last Post